Copper wire extraction machine for copper scrap motors
Copper wire extraction machine for copper scrap motors can adapt to different sizes of copper wire dismantling of motor stator: hydraulic copper wire extraction machine can pull out the copper wire of the motor stator range: 4kw 4-pole hydraulic motor can be used to dismantle the seat number 80-250 seat of various single-phase or three-phase asynchronous motor stator (large models of copper scrap machines using 5.5kw 4-pole hydraulic motor can be expanded to 315 seat number) That is, the inner diameter of 40cm outer diameter of 52cm motor stator)
The main components include frame, lifting table, pulling vise, positioning plate, hydraulic cylinder, manual switch, foot switch. Put the motor stator with copper coils after chopping and cutting on the lifting table, control the motor stator to rise to the positioning plate through the manual switch, the positioning plate will limit the motor stator, and then control the pulling pliers through the foot switch to let the jaws bite the copper coils and pull them out from the stator, so as to complete the disassembly of the stator, and the user can recover the copper coils and stator cores according to the actual situation.
Motor copper machine is the alias of motor dismantling equipment, motor copper machine for the stator in the steel piece of damage is small, good working environment, energy saving and environmental protection, no pollution, no dust. Using liquid pressure to pull out the copper wire, the worker's labor is small, easy to work. Generally do not need heating to pull out the copper wire, unless the copper wire in the motor stator dipping process is too good, the copper wire sticky especially tight is very difficult to pull out when the auxiliary heating.
Motor to take the stator copper wire equipment copper pulling machine recycling efficiency, economic benefits are huge, a machine dismantling efficiency is worth several people's dismantling efficiency, both time and effort, (such as pulling out an ordinary 2.2kw 4-pole motor stator end of all the copper wire, it takes about 12-18 seconds, for Y18.5 two-pole stator without fire, just pull the copper wire three times, you can pull out all the copper wire, and the steel is basically not deformed. And the steel piece basically does not change shape, copper wire daily output of more than 1 ton!)
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
