How about a waste tire shredder?
In the tire crusher, the material enters the cavity of the mechanical press machine, and rotates at a high speed between the impeller and the material, the blade, the toothed disc, and the material and the material. Through multiple impacts, collisions, shearing, friction and other comprehensive actions, the crushing effect is achieved. The crushed materials are classified and collected by an air sieve classifier. Materials that do not meet the fineness requirements are sent back to the silo for further crushing, and the air conditioner is very large. A portion of it is returned to the silo for recycling. The motor drives the main shaft to run at a high speed through the transmission part, so that the rotor installed on the rotary knife holder and the fixed knife installed on the fixed knife holder perform relative shearing motion. The crushing knife group moves at high speed when entering the crushing chamber through the hopper. The material is extruded by cutting and tearing.
The tire crusher is a tool made of special cemented carbide material, which has the characteristics of impact resistance, wear resistance, toughness, etc., simple structure, convenient disassembly, rapid adjustment, and long service life. The movable rotating grid structure can well prevent the deformation of the screen during extrusion, ensure the distance between the blade and the screen, and accelerate the discharge speed. At the same time, screen replacement is also very convenient. Starting: Before starting the crusher, the reducer should be equipped with deceleration oil, and the bearing should be lubricated. Before turning on the power, first check whether there are any foreign objects, partitions and blades damaged in the cutter box of the crusher, and then turn on the machine after confirming that there is no abnormality. Confirm whether the control switch of the electric control box is turned on, and ensure that the electric control box is only activated when there is no hidden danger. Loading: When loading, it should be as consistent as possible to avoid damage to electrical components and motors caused by frequent activation of overload protection.
The small tire crusher does not contain large pieces of metal chips, so as not to damage the cutter when the crusher is working. Tyre shredders can usually shred metal objects 5-8mm thick. Process control: During the crushing process, if vibration or abnormal noise occurs, stop the machine to check whether any hard objects fall into the cutter box, causing gasket damage and deformation. Check step by step after the reducer and motor are finished running. When the crusher is running, manual cleaning of the tool magazine, electric control box and the inside of the machine is not allowed.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
