How do you get copper out of an electric motor?
The motor dismantling machine is a device that separates the rotor and coil of the motor, recycles the waste motor, allows the motor to perform separation work, and separates the copper wire and silicon steel sheet inside to realize the crushing process. and separation. The motor dismantling machine is generally divided into two pieces of equipment, a copper cutting machine and a copper pulling machine, both of which adopt the hydraulic principle, and are mainly used to disassemble the copper wire and silicon steel sheet in the motor stator. Among them, the copper cutter is used to cut the copper wire at one end of the motor stator, and the hydraulic copper puller is used to pull out the cut copper wire in the motor stator from the other end. The application of the motor dismantling machine: mainly the copper shearing machine (cutting a copper wire of the motor stator) cooperates with the hydraulic copper pulling machine to recover the copper wire in the motor stator.
Motor dismantling copper pulling machine quickly disassembles the motor coil equipment, washing machine motor stator insulation and ground automatic disassembly machine: the stator winding and the stator core are insulated 360 degrees. The motor dismantling and copper pulling machine is a motor recycling and dismantling equipment for waste motors. It is easy to use and easy to operate. It can be operated by one person, with high efficiency and fast speed, and can bring benefits. The device uses three-phase power and a 4 kW motor. Its working principle is: first cut off the copper wire at one end of the stator on the cutter, and then pull out the copper wire from the eight claws at the other end of the stator, so as to realize the separation of copper and iron. Pull the copper coil out of the stator to complete the disassembly of the stator.
Users can recycle copper coils and stator cores according to actual conditions. Suitable for motors of different specifications, diameter φ6CM-50cm (0.55 kw motor stator diameter is about 6cm, 90K motor stator diameter is about 40CM). It is suitable for manufacturers who return multi-burning motors and manufacturers who dismantle motors. The working capacity of this equipment is equivalent to the manual disassembly of ten workers. Moreover, the steel plate is not deformed, and the recovery output can reach about 1000kg in four hours.
Production of copper wire drawing machines, motor coil dismantling equipment, washing machine motor stator automatic dismantling machine: 360-degree insulation between the stator winding and the stator core. Phase Insulation: The insulation between the stator windings of each phase. Turn-to-turn insulation: the insulation between the turns of each phase stator winding. After the three-phase winding of the stator is embedded in the slot, a total of six outgoing terminals are introduced into the junction box of the motor base.
The equipment should be operated by one person during operation to avoid misuse. High uniformity. The electric car crusher can crush iron sheets, bicycles, tricycles, car shells, briquettes, color steel tiles, waste household appliances, iron filings, safes, iron railings, etc. Stable operation; safe operation, reliable quality; small vibration, low noise, high efficiency.
Motor dismantling equipment replaces manual and automatic dismantling of waste motor stators or scrapped motor stators
The motor dismantling equipment replaces manual dismantling of waste motor stators or scrapped motor stators, and can achieve the purpose of using copper coils (enameled wires) and stator cores (silicon steel sheets). Recycled copper coils (enameled wires) and stator cores (silicon steel sheets) should also be reused to avoid material waste.
In life, we will encounter many kinds of waste motors, and the motor dismantling machine has become the dismantling equipment for some waste motors such as washing machine motors and air conditioner compressor motors around us. Cutting, pull the copper wire from the other end of the stator with a copper pulling machine, and the silicon steel sheet and copper wire are recycled by the motor factory.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
