How to maintain the solid waste shredder?
SUNY GROUP Intelligent Environmental Protection introduces North American technology to develop and manufacture solid waste shredders, including double-shaft shredders, single-shaft shredders, four-shaft shredders, bulky waste shredders, and industrial hazardous waste shredding systems. SUNY GROUP intelligent environmental protection has mature design technology, reliable quality, excellent service and advanced innovative design concept to provide customers with a complete crushing treatment system.
SUNY GROUP intelligent environmental protection relies on advanced solid waste shredding technology and high-quality workforce to continuously develop and optimize various waste shredding and recycling solutions; relying on good reputation and professional business performance, we continue to expand our domestic and international influence. force. There are several installation cases in China that can be directly visited on site. Design experience. Below, SUNY GROUP intelligent environmental protection will share how to maintain the solid waste shredder, and the maintenance cost is lower.
Precautions for safe operation of solid waste shredder:
1. Start up: Before starting the crusher, it must be ensured that the reducer has been filled with reducer oil and the bearing has been filled with lubricating oil. Before starting the machine, first check whether the cutter box of the crusher is free of foreign debris, and whether the cutter, spacer, and fixed knife are damaged, and then start the machine after ensuring that there is no abnormality. Check whether the control switches of the electric control box are in the open state, and ensure that the electric control box has no potential safety hazards before it can be turned on.
2. Feeding: When feeding, try to keep it as uniform as possible to avoid damage to electrical components and motors caused by frequent overload protection. Small crushers should not contain large pieces of metal debris in the crushed materials to prevent the crusher from running. Broken knife. Larger solid waste shredders can generally shred 5-8mm thick metal objects.
3. Process control: When there is excessive vibration or abnormal noise during the crushing process, stop the machine to check to see if any hard objects fall into the tool box, causing damage and deformation of the tool and spacer. After removing, check the reducer and motor step by step. operating status. During the operation of the solid waste shredder, it is not allowed to manually clean the inside of the cutter box, the electric control box and the body.
Precautions for daily maintenance of solid waste shredder:
① When checking, repairing and maintaining the solid waste shredder, the power supply must be cut off and a warning sign should be attached.
② Only after the solid waste shredder is completely stopped, can the shredder be inspected, maintained, maintained, and its parts replaced.
③ Visually inspect the blades weekly for damage or chipping.
④ Measure the tool radius and thickness so as to arrange the tool repair time.
⑤ Regularly repair the welding blade, and the frequency of repair welding varies according to the type of shredded garbage. Any damage to the blade must be repaired immediately.
⑥ When the repair does not work, replace the blade.
⑦ Before leaving get off work, the unbroken material in the knife box should be crushed and then shut down.
⑧Turn off the power switch, clean the materials scattered around the crusher, and check whether the connection between the motor and the reducer has loose screws.
⑨There is a circular oil level mirror outside the reducer body, through which the lubricating oil of the reducer can be checked regularly. Generally, the lubricating oil of the reducer can cover half of the oil level mirror. If it is lower than half of the oil level mirror, add oil.
⑩After the reducer works for 400 hours for the first time, the lubricating oil must be replaced. In the future, check whether the lubricating oil needs to be changed every six months. Mineral oil and synthetic oil must not be mixed. Regularly add oil to the bearing parts. The bearing parts are easily damaged parts. Frequent oiling can prolong the service life of the bearings.
SUNY GROUP intelligent environmental protection has advanced management and quality control system, providing high-quality equipment with consistent quality. We have a team of professional engineers, providing thousands of successful cases and custom designs. "What do customers really want?" This question has always driven us forward.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
