Machine to separate copper or aluminium from wires and cables
Electricity is used everywhere in our lives - in TVs, refrigerators and industrial wires. With this comes a lot of leftover or scrap wires and cables, so how do you deal with these cables that take up space and are temporarily shelved?
I believe that many people will take copper from the cable, waste, to achieve secondary recycling, so you know how much copper from the waste copper wire to take the method?
The traditional method of taking copper there are two, fire copper method and water powder washing copper method, the first is the fire copper method, fire copper is the use of fire will be the outer skin of the cable plastic through the fire for burning melting, the process produces carbon dioxide, will cause pollution of the air phenomenon, in today's environmental policy is not advocated.
The second is the water powder washing copper method, in the process of crushing and separation of the continuous addition of water, due to the production process to use water, so in general will cause secondary pollution to the environment, is currently not suitable for the use of methods.
The above two traditional methods of recycling waste cable not only for taking the quality of copper and the secondary recycling of plastic sheaths have caused losses, but also a certain amount of pollution to the environment, so there is no better separation method?
A new technology "dry physical separation method", is currently efficient and environmentally friendly separation method, using a dry physical separation method, through the cable and wire recycling equipment will be the waste cable through the coarse crushing, iron removal, fine crushing, specific gravity sorting, electrostatic sorting dual process to achieve the separation of copper and plastic, the separation effect can reach The separation effect can reach nearly 99% of the copper and plastic recovery rate, because the cable and wire separation out of the copper like the size of a grain of rice, so also known as "copper rice machine", is currently the most environmentally friendly, good for the cable wire copper extraction method.
Among the many types of discarded wires, copper and aluminium wires make up the majority, making it more difficult to separate copper or aluminium. After SUNY GROUP's technical staff upgrade, the waste copper and aluminium wire granulator is equipped with an electrostatic sorter after the specific gravity sorter process, which will go through two screening processes when separating the copper or aluminium from the car wires, achieving a complete separation of copper and aluminium plastic with a sorting purity of over 99%.
Using the vertical crusher in the waste copper and aluminium wire crushing and separating machine, the waste copper and aluminium wires are quickly cut off and broken into granular form, after which the two materials with different specific gravity are separated by the physical means of high frequency vibration. In this process is more difficult to separate the fine metal and plastic particles, can be secondary by electrostatic sifter for copper-plastic screening, copper and plastic will be completely sorted out, reduce the loss of copper and plastic, improve production and sorting purity.
Through the waste copper and aluminum wire granulator processing separated from the copper and plastic is granular, copper and plastic quality is not damaged, can be directly to the market for sale, and then the second processing reuse, reuse value potential is relatively large.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
