Shredder Machine for Plastic
Plastic shredder, also called plastic shredder, plastic shredder, is mainly composed of shredding blade group, carrying box, box bracket, feeding system, power system, and electrical control system. The machine is used to crush high-strength, high-toughness materials, such as various plastic containers (plastic dishes, plastic bottles, plastic cans, plastic buckets, plastic packaging boxes, etc.), plastic films (plastic bags, plastic packaging films, agricultural mulch films, etc.) etc.), plastic pipes (PVC pipes, PE pipes, etc.), plastic casings, plastic cords and other plastic products. This series of plastic shredders have the characteristics of low speed, high torque, low noise, etc., using PLC control system, can be automatically controlled, with start, stop, reverse and overload automatic reverse control functions.
Working principle of plastic shredder: The plastic shredder adopts dual-axis independent drive, so that during production, the material is pressed correspondingly, and the automatic feeding function is achieved. In the high torque production process, there will be no shaft winding or equipment jamming.
Features of Plastic Shredder
1. The equipment is equipped with overload protection function, which can prevent damage to the machine caused by overload.
2. The blade is made of hard alloy steel with high wear resistance and high strength.
3. The frame structure is strong and the main frame is made of rectangular tube, which has greater strength and high stability.
4. Using SKF brand bearings, it can carry more impact force.
5. The crushing chamber is welded by high-strength steel plates and heat-treated, with longer service life and greater strength.
Plastic Shredder Maintenance:
1. The bearing of the plastic shredder is the first point of the maintenance work. The temperature of the eccentric bearing should be checked regularly. If it is found to exceed 100 °C, it needs to be stopped immediately for inspection. This is because the eccentric bearing belongs to the cast bearing bush, and the bearing alloy used. The upper limit of normal operating temperature is 100 degrees Celsius.
2. For the lubrication system of the plastic crusher, the daily maintenance inspection is to observe and listen to the gear oil pump for abnormal impact sound, check whether the reading of the oil pressure meter (if any) is in the normal range, and check whether the lubricating oil is sufficient and whether There is oil leakage, and the lubricating oil should be filled and replaced regularly.
3. After the shutdown, clean up the dust and waste around the equipment, and do a good job of cleaning the shredding equipment, so that there is no dust accumulation on the outside, no oil pollution on the body and foundation, no oil leakage in the lubrication system, and no leakage in the electrical system. . The shell of the equipment does not leak dust. In particular, it is necessary to clean the lubricating parts to prevent dust, debris, etc. from entering the lubricating parts and damaging the lubricating oil film to wear the equipment.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
