Waste medical blister recycling machine
The blister packaging of medicines is filled with medicines in the blisters formed by vacuum foaming (blowing) or compression molding, and covered with aluminum foil, etc., and heat-sealed with the blister substrate under certain temperature and time conditions under pressure. made. Due to its wide range of applications and the fact that it is a single-use material, a large amount of blister waste is produced every year. If it is discarded directly, it will not only pollute the environment, but also cause a waste of resources. Therefore, relevant recycling processes are generally carried out to completely separate the aluminum inside. Aluminum is a non-renewable resource that can be reused, so it is scientific and reasonable to recycle medicine. Blister waste can not only avoid environmental pollution, but also realize resource recovery and reuse.
Medical blister separation aluminum
Recycling pharmaceutical blisters requires special aluminum-plastic separation equipment to completely separate aluminum-plastic composite materials into aluminum and plastic. There are better ways to deal with waste aluminum-plastic products such as aluminum-plastic medicine boards. Aluminum-plastic medicine boards contain 20% aluminum and 80% plastic. These aluminum-plastic products can be recycled and reused. Disposal of waste aluminum-plastic medicines not only harms the environment, but also wastes resources.
At present, recycling and reusing the waste aluminum-plastic medicine board is the method chosen by most people. The earlier recycling method used the chemical agent separation method, which added some chemical solvents to the water to remove the aluminum in the waste aluminum-plastic medicine board Separation from plastic through chemical reaction, although this method can achieve the purpose of resource recycling, but the phenomenon of wastewater pollution is also not easy to take, and the input cost is relatively high, and the effect of sorting is not very good. In recent years, the aluminum-plastic separator is the method most people choose to deal with waste aluminum-plastic medicine boards for recycling.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
