Working principle and setting of scrap copper wire stripping machine
The working principle of the stripping machine:
The wire is conveyed by the wire feeder and wire feeder, and the wire cutting and stripping functions are completed by the tool holder assembly.
Main component function introduction:
1. Feeding wheel: conveying wire and stripping the end of the wire. When stripping short wires, the wire stripping machine strips both the wire head and the grain foot (the length of the wire is less than 50mm). When the wire stripping machine is stripping, in addition to stripping the wire head, it also has the function of stripping the middle.
2. Outgoing wire pulley: Convey the wire and strip the wire tail for the wire stripping machine. (The stripping machine has no effect when stripping short wires, so make the "cable pulley lift knob" at the "u" position)
3. Adjustment knob for wire feeder clearance: adjust the wire feeder clearance of the wire stripping machine. The clearance increases when the wire is rotated upwards, and the clearance is reduced when rotated downwards (adjusted according to the thickness of the wire).
4. Adjusting knob for wire feed wheel pressure of wire stripping machine: Adjust the wire feed wheel pressure of the wire stripping machine. After pulling out, rotate clockwise to increase the wire feed wheel pressure. After pulling out, rotate counterclockwise to reduce the wire feed wheel pressure. (It is determined according to the strength of the wire skin of the wire, that is, the difficulty of stripping the wire skin, the difficulty will increase the pressure, and the easy will reduce the pressure)
5. Lifting knob of thread feeder: Raise the thread feeder when the wire stripper is threading, turn the knob clockwise to lift the thread feeder, so that the wire can pass through smoothly; put down the thread feeder and turn the knob counterclockwise to lower it when working Into the wire pulley, press the wire.
6. Outlet pulley gap adjustment knob: adjust the outlet pulley gap for the wire stripper, the upward rotation will increase the gap, and the downward rotation will reduce the gap (adjusted according to the thickness of the wire).
7. Outlet wheel pressure adjustment knob: Adjust the outlet wheel pressure for the wire stripper. After pulling it out, rotate it counterclockwise to increase the outlet wheel pressure. After pulling it out, rotate it clockwise to reduce the inlet wheel pressure. (It is determined according to the strength of the wire skin of the wire, that is, the difficulty of stripping the wire skin of the wire stripping machine, the difficulty will increase the pressure, and the easy will reduce the pressure)
8. Lifting knob of thread outlet pulley: Raise the thread outlet roller when taking out the wire, turn the knob counterclockwise to lift the thread outlet roller, so that the wire can be taken out smoothly: Put down the thread outlet roller when working, and turn the knob clockwise to lower the thread outlet roller. (When using the short stripping procedure, the outlet pulley should be raised)
9. Knife holder assembly: In the wire stripping machine, it is responsible for cutting the wire, stripping the head and the tail. When the machine is stopped, the upper and lower blades need to be opened to the maximum so that the wire can pass through the cutter smoothly.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
