Aluminum plastic recycling machine for blister packs
In recent years, the packaging industry has risen rapidly, and various new packaging materials have emerged in an endless stream. In particular, the application of aluminum foil in the packaging industry has increasingly shown its unique superior performance, forming a new market growth point and opening up new incremental space for the consumption of aluminum foil in the packaging industry. With the rapid development of the global packaging industry, the packaging industry has become an important pillar industry in developed countries. The development of the global packaging industry has greatly promoted the consumption of aluminum foil, making the packaging industry the largest application consumer market for aluminum foil.
With the rapid development of the aluminum foil industry, aluminum foil recycling has become an important part of the industry. Currently, recycled aluminum meets 35% of global aluminum demand, and the percentage is increasing. The aluminum packaging is separated from the aluminum by relevant equipment, and then the aluminum packaging is pressed into large pieces and shipped to five smelters near the border for production and processing into new aluminum products.
Aluminum plastic recycling machine for blister packs
SUNY GROUP has developed a complete set of aluminum-plastic separation equipment based on the actual needs of customers, which can completely separate aluminum-plastic composite materials into aluminum and plastic equipment, completely dry physical separation, without causing secondary environmental pollution, and has a good social and economic benefits.
Working Principle:
1. The aluminum-plastic composite material enters the knife crusher through the conveyor belt and is broken into small pieces of 1 to 2 cm.
2. The pulverizer grinds the crushed aluminum-plastic material into powder, and completely separates the aluminum from the plastic.
3. The particle size of the aluminum-plastic powder is controlled by the rotary vibrating sieve. The small particles that meet the particle size requirements enter the electrostatic separator for sorting, and the larger particles are sent back to the mill for further grinding.
4. The electrostatic separator uses the different conductivity of metal and plastic to separate aluminum powder and plastic powder through electrostatic separation, and the separation purity reaches 99%
5. The pulse dust removal system collects the dust generated during the crushing and sorting process, which is environmentally friendly and pollution-free.
Equipment Advantages:
1. The hardness of the SKD-11 alloy blade used in the crusher can reach HRC58, which can maintain high toughness and high wear resistance under the alternately opened structure.
2. The mill is equipped with air-cooling and water-cooling systems to reduce the temperature and avoid plastic melting due to high temperature.
3. The electrostatic separator is equipped with a special bucket elevator to form an automatic feeding system, which uses high-voltage static electricity to separate aluminum and plastic, and the recovery rate is as high as 99%.
4. The pulse dust removal system is equipped with a pulse valve to automatically remove dust, and the dust removal rate is as high as 99%.
The above is the relevant introduction about the separation and recycling of aluminum-plastic blisters. With the increasing amount of aluminum-plastic waste, how to effectively recycle and reuse can not only produce certain economic effects, but also avoid environmental pollution. If you need or want to know more, please feel free to contact us for consultation.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
