Electric motor recycling machine tools
The motor stator dismantling machine belongs to the motor recycling processing equipment. The purpose of recycling copper coils and silicon steel sheets is achieved by dismantling waste motor stators. Among them, some recycled copper coils and silicon steel sheets can also be reused, which can improve the economic benefits of manufacturers. It has the advantages of environmental protection and safety.
The motor stator dismantling machine is mainly a copper shearing machine (cutting one of the copper wires of the motor stator) and a hydraulic copper pulling machine to recycle the copper wires in the motor stator and use them together in the motor factory. Unqualified motor stator enameled wires and steel plates are recycled. They are also used in some factories that specialize in recycling and dismantling electric motors. They are also widely used in copper wire recycling for washing machine motors and air conditioner compressors.
The motor dismantling equipment puts the used motor stator on the turntable of the equipment, then cuts the coil with professional cutting equipment, and then fixes the stator on the workbench. The tensioning device consists of a wire rope and a motor. At the end of the coil, it is pulled by a hook. Every time the coil is pulled, it can be pulled out of the stator slot. It is convenient and simple, improves work efficiency, reduces workload, and increases the value of used engines at the same time.
The motor copper wire pulling out magic tool The motor stator dismantling machine is an environmental protection device that cuts the motor stator copper wire. The foot switch controls the up and down movement of the cutter, the induction switch controls the upper and lower limit of the cutter, and cuts off the copper coil of the motor stator. The whole device adopts hydraulic drive. When the tangent direction is tangent, the waste motor stator is supported on the support column (roller structure), and the motor stator is cut with a chopped copper plate. The Octopus Handheld copper wire can then be pulled out of the copper wire four times. (This copper cutting machine also needs to be used in conjunction with the copper pulling machine, that is, the stator copper wire is cut off at the copper cutting machine, and the copper wire is pulled out from the copper wire by the copper pulling machine.) The equipment involves the field of automated machinery.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
