Plastic Aluminum Electrostatic Separator Machine
When we deal with aluminum-plastic waste, the most important thing is to separate the plastic and aluminum inside, and the cleaner the separation and the higher the purity, the more valuable it will be. Among the equipment that needs to be used in the separation of plastic and aluminum, the electrostatic separation machine is the most important. In order to make the separation effect good, it is necessary to continuously adjust the electrostatic separation machine to achieve the most effective effect.
Electrostatic separator is also known as electrostatic separator. SUNY GROUP environmental protection can realize the function of sorting and extracting materials twice in one equipment, which can make metal sorting twice, and plastic sorting twice. higher. High-voltage electrostatic separators are widely used in metal and non-metal recycling projects such as waste circuit board recycling equipment, waste wire and cable recycling equipment, and aluminum-plastic sorting and recycling equipment. The equipment has low energy consumption, low noise, and high output. Dust-free and environmentally friendly. For different materials, you can choose to use different electrostatic separator specifications. Our factory can now produce single-roller, double-roller, three-roller, six-roller and multi-roller side-by-side electrostatic separators. According to the customer's requirements for extracting ingredients, purity, and output, we can produce the corresponding electrostatic separators.
Outstanding advantages
1. The electrostatic separator feeding device is a key technology for the purity of sorting materials. According to the different materials, our company's electric separator adopts a unique feeding method, or adopts a separate frequency conversion speed control to control the feeding, so that the materials can enter the corona electric field evenly, and the sorting effect of the materials can be achieved.
The double-roller electric separator can realize the selection of plastics on the second roller to improve the purity of plastics;
2. The electrostatic separator realizes that the metal is selected again on the second roller to improve the purity of the metal. Compared with the single-roller electric separator, it saves time and labor, and the production capacity is improved.
Since tens of thousands of volts of high voltage are generated inside the equipment during operation, special attention should be paid to personal safety during operation. Even if the machine stops working, there are still high voltage charges inside the equipment, which will bring danger to the staff when they are not careful during operation. Therefore, our company specially designed the automatic discharge function for this situation to provide reliable safety guarantee for the operation of the operator.
3. During the operation of the equipment for a period of time, a large amount of dust will be generated inside, which directly affects the sorting effect. Our company specially designed a dust blowing device for this, so that the equipment can always maintain the sorting effect.
4. The electrostatic separator uses a stable high-voltage electrostatic power supply. Due to the influence of weather and humidity or the peak time of electricity consumption, the voltage will change. The instability of the high-voltage power supply will affect the sorting quality. The voltage regulating device makes the high voltage power supply stable.
5. Every update step of the electrostatic separator in our factory takes into account the safety and convenience of maintenance, operation and use. The speed adjustment and feeding adjustment are all controlled by frequency conversion, and the national standard motor is matched. Easy to operate and easy to maintain.
Working principle:
Electrostatic separator, also known as electric separator, discharges high-voltage static electricity generated by the high-voltage generating device inside the equipment to the grounded rotating roller, and the materials to be sorted are evenly lowered onto the rotating roller through a special blanking device. After the conductor material is electrified, it is put into the ground through the grounded rotating roller, and the inertia of the rotating roller is added, and the conductor material is thrown into the conductor receiving hopper. After the non-conductor material is electrified, due to its poor electrical conductivity, it is adsorbed on the surface of the rotating roller, and as the roller turns to the back, it is swept by the brush and falls into the non-conductor hopper. Some of the conductor and non-conductor materials fall into the middle material receiving hopper due to different reasons such as the rotation speed of the roller, the adjustment distance of the equipment baffle, the size of the material particle and the amount of electricity received, and then enter the feeding machine and enter the unloading device for sorting.
In addition, the electrostatic separator is not only suitable for the separation of plastics and aluminum, but also for the separation and recovery of most metals and non-metals. In terms of aluminum-plastic sorting and recycling, SUNY GROUP can provide targeted solutions according to the materials to be processed by customers. The aluminum-plastic materials that can be processed include toothpaste skin, aluminum foil, waste medical boards, various aluminum-plastic packaging materials, etc. If you If you are interested, please feel free to contact us and bring a free trial machine to check the effect.
Recommend products
CONTACT US:
If you have any requirement or suggestion, please fill in the form and send to us, thanks!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231
